|
Feature: |
|
|
|
|
AC180~260VAC input
PF>0.98@230VAC
Short circuit / overload / over-voltage / over temp. protection
Built in remote sense function
Built in remote ON-OFF control
Power good signal
With parallel function (N+1)
Can adjust from 20~100% output voltage by external control 1-5V
Forced air cooling by built in DC fan
3 years warranty
Dimension: 291*132*132mm |
|
|
Case No.ㄩH031 | |
|
MODEL |
CP-800-9 |
CP-800-12 |
CP-800-15 |
CP-800-18 |
CP-800-24 |
CP-800-36 |
CP-800-48 |
CP-800-60 |
|
OUTPUT |
DC VOLTAGE |
9V |
12V |
15V |
18V |
24V |
36V |
48V |
60V |
|
VOLTAGE TOLERANCE |
㊣1.5% |
㊣1.0% |
㊣1.0% |
㊣1.0% |
㊣1.0% |
㊣1.0% |
㊣1.0% |
㊣1.0% |
|
RATED CURRENT |
88A |
66A |
53A |
44A |
33A |
22A |
16A |
13A |
|
CURRENTRANGE |
0~88A |
0~66A |
0~53A |
0~44A |
0~33A |
0~22A |
0~16A |
0~13A |
|
RATED POWER |
792W |
792W |
795W |
800W |
792W |
800W |
768W |
780W |
|
RIPPLE &NOISE(MAX) |
90mVp-p |
120mVp-p |
150mVp-p |
180mVp-p |
240mVp-p |
360mVp-p |
480mVp-p |
500mVp-p |
|
DC VOLTAGEFREQUENCYRANGE |
㊣5.0% typical adjustment by potentiometer20‵100% adjustment by 1‵5VDC external control |
|
SETUP,RISE,HOLD TIME |
800ms, 400ms, 12ms at full load |
|
INPUT |
VOLTAGERANGE |
180‵260VAC selected 47‵63 Hz˙260‵370VDC |
|
AC CURRENT |
5.0A/ 230 VAC |
|
EFFICIENCY |
83% |
84% |
85% |
86% |
88% |
88% |
89% |
90% |
|
INRUSH CURRENT |
60A/230V |
|
LEAKAGE CURRENT |
3.5 mA/240VAC |
|
PROTECTION |
OVERLOAD PROTECTION |
105%‵115% |
|
OVER-VOLTAGE PROTECTION |
110%~135% |
|
HIGH TEMPERATURE PROTECTON |
>100⊥ |
|
ENVIRONMENT |
WORKING TEMP.& HUMIDITY |
-20⊥‵+65⊥ㄛ20%‵90 %RH |
|
STORAGE TEMP.& HUMIDITY |
-20⊥‵+85⊥ㄛ10%‵95 %RH |
|
VIBRATION |
10‵200Hzㄛ2G 10min./1cycle, period for 60min, each along X.Y.Z axes |
|
SAFETY |
WITHSTAND VOLTAGE |
I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC |
|
ISOLATION RESISTANGE |
I/P-O/P, I/P-FG, O/P-FG :100M Ohms / 500VDC |
|
STANDARDS |
SAFETY STANDARDS |
UL60950,TUV EN60950 Approved |
|
EMC STANDARDS |
EN55022,EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11 |
|
OTHERS |
WEIGHT |
2.3Kg; |
|
PACKING |
8pcs/20kg/CARTON |
|
NOTE |
1ㄝAll parameters not specially mentioned are measured at 230VAC input, rated load and 25⊥ of ambient temp..
2. Tolerance: Includes set up tolerance, line regulation and load regulation.
3. Ripple & noise are measured at 20MHz of bandwidth by using a 12§ twisted pair-wire teminated with a
0.1米f & 47米f parallel capacitor.
4. Current limiting 3 times (1.5s, 3.0s, 5.0s) Then intelligent auto recovery before shut down.
5ㄝThe power supply is considered a component which will be installed into a final equipment, the final equipment must be re-confirmed that it still meets EMC directives. | | |
Miss.Wu
