Features:
![]() INPUT voltage range: AC180~260V
![]() PF>0.98@230VAC
![]() Protections: Short circuit/ Over load/Over voltage/ Over temperature
![]() Built-in remote ON-OFF control and remote sense function
Power good signal
![]() With parallel function (N+1)ㄘ
![]() Can adjust from 20%~100% output voltage by external
control 1-5V
![]() Forced air cooling by built-in DC fan
![]() 3 years warrantyDimensions: 290*132*132mmㄗL*W*Hㄘ |
 | | |
|
Model |
CP-1K2 |
|
|
5 |
9 |
12 |
15 |
18 |
24 |
36 |
48 |
60 |
|
DC Voltage |
5V |
9V |
12V |
15V |
18V |
24V |
36V |
48V |
60V |
|
Voltage Tolerance |
㊣2.0% |
㊣1.5% |
㊣1.0% |
㊣1.0% |
㊣1.0% |
㊣1.0% |
㊣1.0% |
㊣1.0% |
㊣1.0% |
|
Rated Current |
200A |
133A |
133A |
80A |
66A |
50A |
33A |
24A |
20A |
|
Current Range |
0ㄜ200A |
0ㄜ133A |
0ㄜ133A |
0ㄜ80A |
0ㄜ66A |
0ㄜ50A |
0ㄜ33A |
0ㄜ24A |
0ㄜ20A |
|
Rated Power |
1000W |
1200W |
1200W |
1200W |
1200W |
1200W |
1200W |
1152W |
1200W |
|
Ripple & Noise |
100mVp-p |
100mVp-p |
120mVp-p |
150mVp-p |
180mVp-p |
240mVp-p |
360mVp-p |
480mVp-p |
500mVp-p |
|
DC Adjustment Range |
Can adjust from 20%~100% output voltage by external control 1-5V |
|
Setup,Rise,Hold Time |
500ms, 50ms, 16ms at full load |
|
|
| INPUT |
|
| Voltage Range |
180‵260VAC47‵63 Hz˙selected by swith 260‵370VDC |
| AC Current |
10A/ 230 VAC |
| Efficiency |
80%ㄗHSCP-1K2-5); 82%ㄗHSCP-1K2-9);84%ㄗHSCP-1K2-12); 85%ㄗHSCP-1K2-15); 86%ㄗHSCP-1K2-18);
89%ㄗHSCP-1K2-24);89%ㄗHSCP-1K2-36);90%ㄗ4HSCP-1K2-8); 90%ㄗHSCP-1K2-60); |
| Inrush Current |
60A/230V |
| Leakage Current |
3.5 mA/240VAC |
| PROTECTION |
|
| Over Load |
105%‵140% |
|
Protection type: Current limiting, delay shut down o/p voltage, re-power on to recover |
| Over Voltage |
110%~135% |
|
Protection type: Shut down o/p voltage, re-power on to recover |
| Over Temp. |
TSW1ㄗPower transistorㄘTemp.>100 ⊥, shut down o/p voltage. Tempˉ100 ⊥ , O/I auto-recovery. |
| ENVIRONMENT |
|
| Working Temp., Humidity |
-20⊥‵+65⊥ㄛ20%‵90 %RH |
| Storage Temp., Humidity |
-20⊥‵+85⊥ㄛ10%‵95 %RH |
| Vibration |
10‵200Hzㄛ2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| SAFETY |
|
| Withstand Voltage |
I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG :100M Ohms / 500VDC |
| STANDARD |
|
| Safety Standard |
Design refer to UL60950,TUV EN60950 |
| EMC Standard |
Design refer to EN55022,EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11 |
| OTHERS |
|
| Weight |
4.5Kg; |
| Packing |
4pcs/19kg/CARTON |
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25⊥ of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12∪twisted pair-wire terminated with a 0.1米 & 47米parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.4.Current limiting 3 times(1.5s,3.0s,5.0s)Then intelligent auto recovery before shut down
5.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | | | | |
Miss.Wu
