Features:
![]() Universal AC input/ full range
![]() Built-in active PFC function, PF>0.95
![]() 100% full load burn-in test
![]() Protections: Short circuit/ Over load/ Over voltage/ Over temperature
![]() Forced air cooling by built-in DC fan
![]() Built-in fan speed control
![]() Fixed switching frequency at 100KHz
![]() 3 years warranty
![]() Dimensions: 215*115*50mm ㄗL*W*Hㄘ |
 | | |
|
Model |
P-320-5 |
P-320-7.5 |
P-320-12 |
P-320-13.5 |
P-320-15 |
P-320-24 |
P-320-27 |
P-320-48 |
|
DC Voltage |
5V |
7.5V |
12V |
13.5V |
15V |
24V |
27V |
48V |
|
Voltage Tolerance |
㊣2% |
㊣2% |
㊣1% |
㊣1% |
㊣1% |
㊣1% |
㊣1% |
㊣1% |
|
Rated Current |
55A |
40A |
25A |
22A |
20A |
13A |
11.7A |
6.7A |
|
Current Range |
0ㄜ55A |
0ㄜ40A |
0ㄜ25A |
0ㄜ22A |
0ㄜ20A |
0ㄜ13A |
0ㄜ11.7A |
0ㄜ6.7A |
|
Rated Power |
275W |
300W |
300W |
297W |
300W |
312W |
315.9W |
321.6W |
|
Ripple & Noise |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
200mVp-p |
240mVp-p |
|
DC Adjustment Range |
㊣10% |
㊣20% |
-16%,㊣10% |
㊣11% |
-10%,㊣20% |
-16%,㊣10% |
-4%,㊣18% |
-15%,㊣17% |
|
Setup,Rise,Hold Time |
800ms,50ms,16ms/230VAC2500ms,50ms,16ms/115VAC at full load | |
| INPUT |
|
| Voltage Range |
88‵264VACselected by 47‵63 Hz˙120‵370VDC |
| Power Factor |
PF>0.95/230VAC,PF>0.98/115VAC at full load |
| AC Current |
5A/115 VAC2.5A/230VAC |
| Efficiency |
79%ㄗHSP-320-5); 83%ㄗHSP-320-7.5); 86%ㄗHSP-320-12); 86%ㄗHSP-320-13.5);
86%ㄗHSP-320-15); 87%ㄗHSP-320-24); 88%ㄗHSP-320-27); 89%ㄗHSP-320-48); |
| Inrush Current |
22A/115VAC40A/230VAC |
| Leakage Current |
ˉ1 mA/240VAC |
| PROTECTION |
|
| Over Load |
105%~135% |
|
Protection type: Fold back current limiting, recovers automatically after fault condition is removed |
| Over Voltage |
115%~135% |
|
Protection type: Shut down o/p voltage, re-power on to recover |
| Over Temp. |
TSW1ㄗPower transistorㄘWhen temp. in 80㊣5 ⊥ㄗ70⊥㊣5 ⊥5Vㄘ, shut down o/p voltage, temp. ˉ80㊣5 ⊥ㄗ70⊥㊣5 ⊥5Vㄘ, O/I auto-recovery |
| ENVIRONMENT |
|
| Working Temp., Humidity |
-20⊥‵+65⊥˙20%‵90 %RH |
| Storage Temp., Humidity |
-40⊥‵+85⊥˙10%‵95 %RH |
| Vibration |
10‵500Hzㄛ2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| SAFETY |
|
| Withstand Voltage |
I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC |
| STANDARD |
|
| Safety Standard |
Design refer to UL60950,TUV EN60950 |
| EMC Standard |
Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024 |
| OTHERS |
|
| Weight |
1.1Kg |
| Packing |
12pcs/14.0Kg/0.98CUFT |
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25⊥ of ambient temperature. |
|
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12∪twisted pair-wire terminated with a 0.1米 &47米
parallel capacitor. |
|
3.Tolerance: includes set up tolerance, line regulation and load regulation. |
|
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must
be re-confirmed that it still meets EMC directives. | | |
Miss.Wu
