Features:
![]() Unversal AC input/ full range
![]() Built-in active PFC function, PF>0.95
![]() 100% full load burn-in test
![]() Protections: Short circuit/ Over load/ Over voltage/ Over temperature
![]() Forced air cooling by built-in DC fan
![]() Built-in fan speed control
![]() Fixed switching frequency at 100KHz
![]() 3 years warranty
![]() Dimensions: 215*115*50mm ㄗL*W*Hㄘ |
 | | |
|
Model |
P-300- |
|
|
5 |
7.5 |
12 |
13.5 |
15 |
24 |
27 |
48 |
|
DC Voltage |
5V |
7.5V |
12V |
13.5V |
15V |
24V |
27V |
48V |
|
Voltage Tolerance |
㊣2% |
㊣2% |
㊣1% |
㊣1% |
㊣1% |
㊣1% |
㊣1% |
㊣1% |
|
Rated Current |
50A |
34A |
24A |
21A |
19A |
12.5A |
11A |
6.25A |
|
Current Range |
0ㄜ50A |
0ㄜ34A |
0ㄜ24A |
0ㄜ21A |
0ㄜ19A |
0ㄜ12.5A |
0ㄜ11A |
0ㄜ6.25A |
|
Rated Power |
250W |
255W |
288W |
285W |
285W |
300W |
297W |
300W |
|
Ripple & Noise |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
200mVp-p |
240mVp-p |
|
DC Adjustment Range |
4.5-5.7V |
6-9V |
10-13.2 |
12-15V |
13.5-18V |
20-26.4 |
26-32V |
41-56V |
|
Setup,Rise,Hold Time |
800ms,50ms,16ms/230VAC2500ms,50ms,16ms/115VAC at full load |
|
|
| INPUT |
|
| Voltage Range |
88‵264VAC120‵370VDCfrequency:47‵63 Hz |
| Power Factor |
PF>0.95/230VAC,PF>0.98/115VAC at full load |
| AC Current |
4A/115 VAC2A/230VAC |
| Efficiency |
75%ㄗHSP-300-5); 80%ㄗHSP-300-7.5); 83%ㄗHSP-300-12); 83%ㄗHSP-300-13.5);
83%ㄗHSP-300-15); 85%ㄗHSP-300-24); 85%ㄗHSP-300-27); 85%ㄗHSP-300-48); |
| Inrush Current |
18A/115VAC36A/230VAC |
| Leakage Current |
ˉ2 mA/240VAC |
| PROTECTION |
|
| Over Load |
105%~135% |
|
Protection type: 105%~135% constant current>135%, shut down o/p voltage, recovers automatically after fault condition is removed |
| Over Voltage |
5.65-6.75ㄗHSP-300-5); 9.4-10.9ㄗHSP-300-7.5); 13.8-16.2ㄗHSP-300-12); 15.5-18.2ㄗHSP-300-13.5);
18-21ㄗHSP-300-15); 27.6-32.4ㄗHSP-300-24); 33.7-39.2ㄗHSP-300-27); 57.6-67.2ㄗHSP-300-48); |
|
Protection type: Shut down o/p voltage, re-power on to recover |
| Over Temp. |
TSW1ㄗPower transistorㄘWhen Temp. in 80㊣5 ⊥ㄗ70⊥㊣5 ⊥5Vㄘ, shut down o/p voltage, |
|
Temp.ˉ65㊣5 ⊥ㄗ55⊥㊣5 ⊥5Vㄘ, O/I auto-recovery. |
| ENVIRONMENT |
|
| Working Temp., Humidity |
-20⊥‵+65⊥˙20%‵90 %RH |
| Storage Temp., Humidity |
-40⊥‵+85⊥˙10%‵95 %RH |
| Vibration |
10‵500Hzㄛ2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| SAFETY |
|
| Withstand Voltage |
I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC |
| STANDARD |
|
| Safety Standard |
Design refer to UL60950,TUV EN60950 |
| EMC Standard |
Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024 |
| OTHERS |
|
| Weight |
1.1Kg |
| Packing |
12pcs/14.0Kg/0.98CUFT |
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25⊥ of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12∪twisted pair-wire terminated with a 0.1米 &47米 parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | | |
Miss.Wu
