Features:
![]() Universal AC input/ full range
![]() Built-in active PFC function
![]() 100% full load burn-in test
![]() Protections: Short circuit/ Over load/ Over voltage
![]() Built-in constant current limiting circuit
![]() LED indicator for power on
![]() Fixed switching frequency at PFC: 7KHzPWM:134KHz
![]() 3 years warranty
![]() Dimensions: 179*99*33mmㄗL*W*Hㄘ |
 | | |
|
Model |
P-75 |
|
|
3.3 |
5 |
7.5 |
12 |
13.5 |
15 |
24 |
27 |
48 |
|
DC Voltage |
3.3V |
5V |
7.5V |
12V |
13.5V |
15V |
24V |
27V |
48V |
|
Voltage Tolerance |
㊣2% |
㊣2% |
㊣2% |
㊣2% |
㊣2% |
㊣2% |
㊣1% |
㊣1% |
㊣1% |
|
Rated Current |
15A |
15A |
15A |
15A |
15A |
15A |
15A |
15A |
1.6A |
|
Current Range |
0ㄜ15A |
0ㄜ15A |
0ㄜ15A |
0ㄜ15A |
0ㄜ15A |
0ㄜ15A |
0ㄜ15A |
0ㄜ115A |
0ㄜ1.6A |
|
Rated Power |
49.5W |
75W |
75W |
75.6W |
75.6W |
75W |
76.8W |
75.8W |
76.8W |
|
Ripple & Noise |
80mVp-p |
80mVp-p |
80mVp-p |
80mVp-p |
80mVp-p |
380mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
|
DC Adjustment Range |
-5%ㄛ+10% |
|
Setup,Rise,Hold Time |
600ms, 60ms, 20ms at full load |
|
|
| INPUT |
|
| Voltage Range |
85‵264 VAC47-63Hz˙120‵370VDC |
| Power Factor |
PF>0.93/230VAC,PF>0.96/115VAC at full load |
| AC Current |
1.3A/115 VAC0.7A/230VAC |
| Efficiency |
68%ㄗHSP-75-3.3); 72%ㄗHSP-75-5); 74%ㄗHSP-75-7.5); 77%ㄗHSP-75-12); 78%ㄗHSP-75-13.5);
79%ㄗHSP-75-15); 80%ㄗHSP-75-24); 80%ㄗHSP-75-27); 80%ㄗHSP-75-48); |
| Inrush Current |
Cold start 40A/230VAC |
| Leakage Current |
<2mA/240VAC |
| PROTECTION |
|
| Over Load |
105%~150% |
|
Protection type: Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage |
115%‵135% |
|
Protection type: Shut down o/p voltage, re-power on to recover |
| Function |
|
| Remote Control(Optional) |
CN3:4 ~ 10VDC POWER OFF , <0 ~ 0.8VDC POWER ON |
| ENVIRONMENT |
|
| Working Temp., Humidity |
10⊥‵+60⊥˙20%‵90 %RH |
| Storage Temp., Humidity |
-20⊥‵+85⊥˙10%‵95 %RH |
| Vibration |
10‵500Hzㄛ2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| SAFETY |
|
| Withstand Voltage |
I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC |
| STANDARD |
|
| Safety Standard |
Design refer to UL1950,TUV EN60950 |
| EMC Standard |
EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024 |
| OTHERS |
|
| Weight |
0.58Kg |
| Packing |
20pcs/12.0Kg/0.64CUFT |
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25⊥ of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12∪twisted pair-wire terminated with a 0.1米 &47米parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | | | | |
Miss.Wu
