Features:
![]() High reliability, low ripple
![]() AC input voltage AC200~260V
![]() Protections : Short circuit/ Over load/Over voltage/ Over temperature
![]() Built-in remote ON-OFF control and remote sense function
![]() With parallel function
![]() Can adjust from 20%~100% output voltage by external ![]() control 1-5V
![]() Forced air cooling by built-in DC fan
![]() 2 years warranty
![]() Dimensions: 291*132*132mmㄗL*W*Hㄘ |
 | | |
|
Model |
CN-1K5-12 |
CN-1K5-15 |
CN-1K5-24 |
CN-1K5-48 |
|
DC Voltage |
12V |
15V |
24V |
48V |
|
Voltage Tolerance |
㊣1% |
㊣1% |
㊣1% |
㊣1% |
|
Rated Current |
125A |
100A |
62.5A |
32A |
|
Current Range |
0ㄜ125A |
0ㄜ100A |
0ㄜ62.5A |
0ㄜ32A |
|
Rated Power |
1500W |
1500W |
1500W |
1536W |
|
Ripple & Noise |
120 mVp-p |
150 mVp-p |
240mVp-p |
480mVp-p |
|
DC Adjustment Range |
Can adjust from 20%~100% output voltage by external control 1-5V |
|
Setup,Rise,Hold Time |
800ms, 50ms, 16ms at full load | |
| INPUT |
|
| Voltage Range |
200‵260 VAC47‵63 Hz˙290‵370VDC |
| AC Current |
12A/ 230 VAC |
| Efficiency |
83%(HSCN-1K5-12); 84%(HSCN-1K5-15); 85%(HSCN-1K5-24); 87%(HSCN-1K5-48); |
| Inrush Current |
120A/230V |
| Leakage Current |
3.5 mA/240VAC |
| PROTECTION |
|
| Over Load |
110%‵135% |
|
Protection type: Current limiting, delay shut down o/p voltage, re-power on to recover |
| Over Voltage |
110%~135% |
|
Protection type: Shut down o/p voltage, re-power on to recover |
| Over Temp. |
TSW1ㄗPower transistorㄘtemp.>100 ⊥, shut down o/p voltage, re-power on to recover |
| ENVIRONMENT |
|
| Working Temp., Humidity |
-10⊥‵+65⊥ㄛ20%‵90 %RH |
| Storage Temp., Humidity |
-20⊥‵+85⊥ㄛ10%‵95 %RH |
| Vibration |
10‵200Hzㄛ2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| SAFETY |
|
| Withstand Voltage |
I/P-O/P, I/P-FG:1500VAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, >100M Ohms / 500VDC |
| STANDARD |
|
| Safety Standard |
Design refer to UL1950,CSA22.2,IEC60950 |
| EMC Standard |
Design refer to FCC Part 15 Class A |
| OTHERS |
|
| Weight |
4.5Kg |
| Packing |
4pcs/20kg/CARTON |
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25⊥ of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12∪twisted pair-wire terminated with a 0.1米 &47米parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | | |
Miss.Wu
