|
Feature: |
|
|
|
|
High efficiency, high reliability
Universal AC input / full range
100% full load burn-in test
Short circuit / overload / over-voltage protection
Cooling by free air convection
2 years warranty
Dimension: 199*110*50mm
Triple output, high precision voltage |
|
|
Case No.：H005 | |
|
MODEL |
T-100C |
T-100D |
|
CH1 |
CH2 |
CH3 |
CH1 |
CH2 |
CH3 |
|
OUTPUT |
DC VOLTAGE |
5V |
15V |
-15V |
5V |
12V |
-24V |
|
VOLTAGE TOLERANCE |
±2% |
±6% |
±6% |
±2% |
±6% |
±6% |
|
RATED CURRENT |
10A |
2.5A |
1A |
6A |
2A |
2A |
|
CURRENTRANGE |
2-12A |
0.2-2.5A |
0.1-1A |
2-12A |
0.1-2A |
0.2-2A |
|
RATED POWER |
100W |
102W |
|
RIPPLE &NOISE(MAX) |
80mVp-p |
150mVp-p |
150mVp-p |
80mVp-p |
150mVp-p |
150mVp-p |
|
DC VOLTAGEFRE QUENCY RANGE |
CH1：+10,-5% |
|
SETUP,RISE,HOLD TIME |
200ms,500ms,16ms |
|
INPUT |
VOLTAGERANGE |
85～132 VAC/170～264VACselected by switch 47～63 Hz；240～370VDC |
|
AC CURRENT |
2.5A/115 V1.25A/ 230 V |
|
EFFICIENCY |
77% |
79% |
|
INRUSH CURRENT |
Cold start30A/115V60A/230V |
|
LEAKAGE CURRENT |
＜0.5mA/240VAC |
|
PROTECTION |
OVERLOAD PROTECTION |
105%～150% Shut down O/P voltage, re-power on to recover |
|
OVER-VOLTAGE PROTECTION |
。。。 |
|
HIGH TEMPERATURE PROTECTON |
。。。 |
|
ENVIRONMENT |
WORKING TEMP.& HUMIDITY |
-10℃～+60℃；20%～90 %RH |
|
STORAGE TEMP.& HUMIDITY |
-20℃～+85℃；10%～95 %RH |
|
VIBRATION |
10～500Hz，2G 10min./1cycle, period for 60min, each along X.Y.Z axes |
|
SAFETY |
WITHSTAND VOLTAGE |
I/P-O/P：3KVACI/P-FG：1.5KVACO/P-FG：0.5KVAC |
|
ISOLATION RESISTANGE |
I/P-O/P, I/P-FG, O/P-FG：500VDC/100MΩ |
|
STANDARDS |
SAFETY STANDARDS |
Design refer to UL1012 |
|
EMC STANDARDS |
Design refer to FCC PART15 J CONDUCTION CLASS B |
|
OTHERS |
WEIGHT |
0.86Kg |
|
PACKING |
16pcs/14.7Kg/0.95CUFT |
|
NOTE |
- All parameters not specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temp. 70% RH.
- Tolerance: Includes set up tolerance, line regulation and load regulation.
- Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire teminated with a
0.1μf & 47μf parallel capacitor.
- 进线电压稳定度测试：满负载时进线最低电压到最高电压.
- 负载稳定度测试：负载从0%至100%,其他Output为60%额定负载.
- All output can achieve the max. current, but full load can not exceed the max. output power.
| | |
Miss.Wu
